Search results

If you have Vic jr heads then you have stud mount rockers not pedestal. You have to adjust the valve lash and the tighten them down by hand. If you have a hyd. roller cam then follow these steps. loosen the rocker nut and loosen the allen head screw inside the nut a few turns. Tjighten the...

The ring gear bolts need to be blue loctited anf torqued, the main caps need torqued and the pinion nut will need tightened to get the correct wear pattern and depth (which may require the use of a breaker bar and pipe). You will need the bearing and shim from the pinion that is currently installed.

I know and he will tell you that he didn't race it much but there are videos all over Streetfire that prove otherwise. Sory again for the loss man. Hopefully you can find another clean Cobra!

Procharger FTW! Kenne Bells run out of air too fast IMO but they have a following of fanatics that will try to convince you that a K/B is the greatest thing ever developed. Well, it is if you want a mild mannered street car with some extra zip at the track. Joel Kasmirzak (01badss) has a...