Feeler 1989 Notch roller

Mikl D

Mikl D

Active Member
#1
#1
Mods Please delete Feeler 1989 Notch roller

Hey guys. I know that some of you from SVTsnake know my situation, but for those who don't, my 1989 Notch has an engine issue indicated by oil pressure problems leading me to contemplate swapping in a new motor or selling as a roller.

I figured I would test the waters of the roller market .

Asking $3,000 as it sits now, but like the title says it is a feeler so make an offer. I will pull the engine, or you can have it as is (I guess it isn't a true roller then lol).


most of the good mods are suspension parts. The exhaust sounded good when it was running :(

3:73s
disc brakes 5lug conversion,

Steeda ball joints
Steeda bump steer
Steeda adjustable caster camber plates
8 way adjustable shocks and struts
Eibach pro springs and sway bars
Tubular control arms upper and lower
poly bushings
All new brakes calipers pads rotors and braided line master

BBK headers
BBK hpipe
Flow master exhaust
BBK Cold air kit
70mm Mass air meter
MSD Cap rotor coil
NEW Ford Racing wires
Autolite spark plugs
Walboro 255lph fuel pump

Newer interior carpet
Newer seats
Newer door panels with custom running pony and mustang on them
Newer headliner, package tray, sills, and all new weather stripping
New Heatercore last year

17" bullit wheels and tires
Clear headlights

65 MM throttle body

BBK Fuel pressure regulator,

hose kit from Ford Racing (blue)

GT40 upper and lower intakes

Here are some pics:
















 
Last edited:
Mikl D

Mikl D

Active Member
#3
#3
Gingerbreadman said:
engine bay pick? has it been hit? miles?, may have a friends thats interested
Click to expand...
Never hit to my knowledge, but I have only had it for a year. There are no signs of any damage though. Odometer says 64k, but the odometer is not original. When I ran the carfax, I figured it had about 130k miles.


Here is the engine bay before I put the GT40 intakes, and Ford Racing Blue Hose kit on it:

 
B

Blwn04

Well-Known Member
#11
#11
Best of luck with the sale Mikey....Jens sad she wont be geting a toy now but she will be just fine, going to start house shopping in June...then she can get a toy.
 
Mikl D

Mikl D

Active Member
#14
#14
Blwn04 said:
Best of luck with the sale Mikey....Jens sad she wont be geting a toy now but she will be just fine, going to start house shopping in June...then she can get a toy.
Click to expand...
dsblk93gt said:
If you still have it at tax time I know someone that will grab that car right up! Very sharp car!!
Click to expand...
vinnyv said:
Were are you located would like to see it in person..
Click to expand...

Thanks for the interest guys. A friend of mine convinced me to let me have him trouble shoot it for me over the winter. So it looks like I will be keeping it, and hoping to get it back to good wihtout a whole new engine
 
Mikl D

Mikl D

Active Member
#18
#18
Thanks guys getting ready to cut into that engine, and see what the deal is. Going to just pull it, and see if I can reuse the short block. New bearings, and a nice cam & heads upgrade should make the spring a lot more fun.
 
You must log in or register to reply here.