99 cobra v1 build thread

M

MR99SVTCOBRA

Formally mr97stanggt
#1
#1
cant pay for someone to install it sooo....ok thought id start a tread ill start on the build as soon as i find an instruction manual for this kit


now i want to order a fuel pump just dont know what to order any help on which fuel pump i should order........... oh and the kit came with a tapped oil pan should i replace mine with that or should i just tap mine i know its a pain to get the oil pan out with the suspension in the way
 
M

MR99SVTCOBRA

Formally mr97stanggt
#2
#2
update ordered a focus fuel pump oil drain and oil feed kits also ordered a new power pipe and #39 injectors so hope fully everything will be here monday or tuesday and i can start
 
dsblk93gt

dsblk93gt

5.0 Moderator
#4
#4
MR99SVTCOBRA said:
update ordered a focus fuel pump oil drain and oil feed kits also ordered a new power pipe and #39 injectors so hope fully everything will be here monday or tuesday and i can start
Click to expand...
My friend maxed out his 99 Cobra with 8lbs and ProCharger, be careful and make sure whoever tunes the car logs the duty cycle of the pump CAREFULLY. You may want to get a Kenne Bell BAP too.
 
M

MR99SVTCOBRA

Formally mr97stanggt
#6
#6
I'm only looking for 6lbs I don't have an intercooler so I don't want to push my luck I have 300rwhp now so if 6lbs gives me 390 to 400 rwhp I would be happy until I get it aftercooled or intercooled
 
M

MR99SVTCOBRA

Formally mr97stanggt
#7
#7
fuel pump came in today ....


still waiting on the fuel injectors,oil feed, and oil drain

i couldnt help my self and i odered a new power pipe and some cuplers i was missing
i have an anderson power pipe but its kind of scrached up and would look ugly under the hood
 
1990_LX

1990_LX

Clubhouse Moderator
#9
#9
Good luck Alex, like most things with cars, it's not hard, just take your time and be careful...I'm sure you'll be fine.
 
M

MR99SVTCOBRA

Formally mr97stanggt
#12
#12
so the injectors should be here thursday as it says on the tracking number

but the air intake assm i ordered from superchargersonline (powerpipe) is taking a long time to be shipped :confused::mad:
 
M

MR99SVTCOBRA

Formally mr97stanggt
#17
#17
ok so im missing a vortech water pump pulley its says here it doesnt have a flange

im missing the steel idler spacer

and on the braket right behind the oil drain hose there is supposed to be a hole that fits a 8mm x70 bolt and washer .....that bolt hole is not there im soo pissed i wasted all day trying to figure out how the braket lines up but none of the holes on the bracket match the holes on the block :mad: i only got one hole on the timing cover to match up and the bracket ...









^^^^ the one one the left is the idler pulley right?

is there a manual for a v1 kit because this manual says v2 i dont think it is the same
 
dsblk93gt

dsblk93gt

5.0 Moderator
#19
#19
That looks like a tensioner pulley to me for a forward rotation Vortech kit.

This is what the 99 stuff looks like

  • [FONT=Verdana, Arial, Helvetica, sans-serif]Smooth Idler Pulley[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Belt 112.89" (V2A046-113)[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Mounting Bracket Gen II[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Spacer A[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Spacer B[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Water Pump Pulley[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]3/8-16 x 1-3/4 HXHD, G8[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]3/8-16 x 2-1/4 HXHD, G8[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]Cobra Plaque[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]10-24 x 1/2 BUTTN Hard CRWW[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]M8 x 1.25 x 16 HXHD[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]M8 x 1.25 x 25 HXHD[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]M8 x 1.25 x 65 SQC[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]M8 x 1.25 x 70 HXHD CL8.8[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]NUT, M8 x 1.25[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]#10 Flat Washer[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]5/16" Washer, Custom[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]5/16" AN Washer, Plated[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]3/8 AN960 FLAT Washer, Plated[/FONT]
  • [FONT=Verdana, Arial, Helvetica, sans-serif]M8 x 1.25 Stud, 4v ALTERNTR[/FONT]
 
You must log in or register to reply here.