Search results

Broken ground wire, fixed, repaired and working-out here

Anyone ever have this problem? I have HID headlights and Fog lights, working fro moths with no issues. (2000 GT). I turned on my lights this evening and none of the lights work up front. Tail lights are ok. The front directional lights do work. High beams don't work, pulling the high beam...

Install completed except for Cobra water tank. The inlet air temps dropped from 160*-170* down to 95*-105* without the fans running, with fans running the temps go down into the 85*-95* range. I haven't taken it to be re-tuned with the changes yet so I can only say, at this point, seat of the...

Parts still for sale.

Parts still for sale.

So far I installed heat exchanger with two 7 inch fans, cobra water pump and some relays for the fans and pump. Waiting for 03' - 04' cobra water reservoir tank upgrade. I'll be using type 8 intercooler from Frozenboost. Piping is gonna be the hard part but we'll see how it goes. My intake temps...

The only LED I used was for the Front turn signals. I do not use LEDs for anything else. I still have the original OEM bulbs for rear turn signal and brakes, never had to replace one bulb. Sorry. You will have to add resistors to make LEDs work properly, which is not really what I want to get...

Do you have the original battery? I had similar problem and it was the battery. I still had the original battery, 11 yrs old, but still worked. The problem I believe was that the battery always required charging and the iac compensates for that. when the ac is on it's too much strain on the...

This may sound silly but how old is your battery? The iac will compensate for charging the battery and the addition of ruining the ac may be too much. I found this problem because I had similar problem to yours and replacing the battery fixed the issue. I use Motorcraft original battery. It...

There are 3 wires on the turn signal harness they probably put the resistor between the wrong wires because mine did that and I switched out one wire and it was good then.

Anyone on here use an air to water intercooler core besides Vortechs $1200 piece? I'm looking on Frozenboost and Votion and others but can't seem to find the intercooler core that will support 400+ HP and still fit. Also what size radiator did you go with? I want to use Vortechs reservoir that...

MM's CC plates have 4 bolts so the force from the shaft of the strut is equally distributed to the plate. BBK has three bolts so the force is not even. The shape of BBK plate has the force applied in somewhat of a cantilever to one of the three bolts which causes unnecessary stress and possible...

Bump

Bump