Poor instructions
- Thread starter FrostByte
- Start date
Instructins show nothing of what your supposed to plug into, where it run wires etc. Much more complicated than orignally thought especially with such poor instructions.
1. our website says the following when you go to hidguy.net/install which has on all our stickers that we put on each box of HID's that you purchase:
This website is only Intended to Help (Assist) Customers with knowledge and guides for installations of items purchased from our website; in No Way, Shape or Form is HIDGuy.net and Racso Industries reponsible for any Damage caused to any Vehicle, Person or Item due to Improper Installation or even by following all steps exactly as stated in our Install Guides (Installation Instructions). The Buyer is fully responsible for all Damages and is FULLY Suggested to have a Professional install items, no matter how simple or difficult it may seem. These is simply a DIY guide for those who can handle the complications and damages and understand the risk and that We (HIDGuy.net & Racso Industries) are not responsible in any way for any Damages.
Please pay close attention to the bolded part.
2. And no where in your previous thread stated here:
http://www.newyorkmustangs.com/foru...moked-headlight-lenses-t30038.html#post489702
did i see you ask how simple or how hard the install was going to be. You just stated you needed a HID kit for your smoked out headlights.
3. We offer a BASIC wire diagram for single beam and bi xenon hid kits. As ALL cars are different and install's might vary from car to car. As which we can not and will not be held responsible for any issues you may come across because there was something on our guide that your car did or didn't have.
4. Our HID kits come as promised PLUG AND PLAY. Which only means that all connectors will plug into your factory harnesses and there is no splicing into factor harnesses.
If you have any further questions please do not be afraid to ask, but understand why we can not have instructions for every single vehicle out there as this would be very time consuming..and this is why we recommend that you have a professional install them.
Instructions are still poor, even for professionals. I am sure that after isntalling I can write up some thing beter than what is on your instructions page. MINIMAL instructions @ best.
I am quite handy with tools & following instructions as I am a refrigeration tech & can read & follow schematics.
There is one connector on your harnes that isnt even shown inthe instructions, where do we plug your harness into the car?
Dose the big blue plu go into one of the old headlight socket?
I am quite handy with tools & following instructions as I am a refrigeration tech & can read & follow schematics.
There is one connector on your harnes that isnt even shown inthe instructions, where do we plug your harness into the car?
Dose the big blue plu go into one of the old headlight socket?
Last edited:
Just letting you know that what we offer and that at any time you had questions about this in your thread you never once asked about instructions or easy of installation. All you had to do was ask and we could have explained this over the phone or written you up something. We apologize that this may seem poor to you, but it gets the job done for a lot of people that have purchased our HID Kits.