Well last night (WED) my friend and I got the drivers side JBA LT installed as well as the new Steeda motor mount and 2 night we got the passenger side on. I figure a few more hours and we will have it all wrapped up. We have to put the new motor mount on and re install the starter and then hook up the H-pipe with the high flow cats. I must say the hard stuff is done I think! I am so excited to get this all done. I still have to buy a SCT3 but that will be coming soon.
Header install started!!
- Thread starter jared88
- Start date
I am going to have it Dyno tuned by Quintin Brothers in Williston because they are very close to us.
As far as the install goes it is not as hard as I thought it was going to be. You should have someone to help for sure. One thing that sucks for some reason the bolts that were sent from JBA all say 8.8 on them and most of them are 1/2' and for some reason a few are 13mm. That just makes it a pita. One other thing for some reason the clamps I got to connect the H-pipe to the exhaust the clamp is made with 2 different size ends and the H-pipe and the exhaust are the same exact size?? It looks like I have to do buy some new clamps. If you get a set of Headers and need some help let me know I will try to meet up with you and give you a hand.
As far as the install goes it is not as hard as I thought it was going to be. You should have someone to help for sure. One thing that sucks for some reason the bolts that were sent from JBA all say 8.8 on them and most of them are 1/2' and for some reason a few are 13mm. That just makes it a pita. One other thing for some reason the clamps I got to connect the H-pipe to the exhaust the clamp is made with 2 different size ends and the H-pipe and the exhaust are the same exact size?? It looks like I have to do buy some new clamps. If you get a set of Headers and need some help let me know I will try to meet up with you and give you a hand.
Lol I should have some pics later. I must asy I just got done putting the Starter in and what a PITA to do. It makes it hard with the header going through there now. I took the tire off and it made it a little easier. All I have left is to tighten one bolt on the Motor mount, hook up H-pipe and reconnect the battery and then its pretty much done! I will have to get my video recorder out and try and get a sound clip but before I do that I have to wash the car its filthy!
Oh great!! I was going to order 2 more o2 extensions and I was reading something before and it did not say anything about that and that is where I cut and ****ed the wires. If I didnt do it there I would of had to do it above my head under the car and that would of sucked. I did take the car for a ride and OMG it is loud and I think it sounds sick. The one bad thing is the wife thought it was loud before and she hated riding in it so I think she is really going to hate it now. How long do you think it will take if that is the case for the sensors to burn out?
Sorry I still dont have pictures but i will get some as well as a S/Clip
Sorry I still dont have pictures but i will get some as well as a S/Clip