Andrew1021 winter build...
- Thread starter Andrew1021
- Start date
They make some great stuff..
i have no idea because its not on their website. i will request more info tomorrow. I heard good stuff about level 10's 5r55s so im sure its strong...
also...
here is a preview of what my car shall sound like with my new cams and heads
[ame=http://www.youtube.com/watch?v=y20Sjp0k8Jw]YouTube - 2007 Mustang GT - Open Headers, Comp Cams Stage 3 XFI Cams, Livernois Stage 3 Heads[/ame]
i was going with BBR stage 2 cams but i talked to comp and fell in love with these.... however i am having comp do a slight modification to the specs and custom grinding them
.560/.560 and 305/320 with a 113LSA
also...
here is a preview of what my car shall sound like with my new cams and heads
[ame=http://www.youtube.com/watch?v=y20Sjp0k8Jw]YouTube - 2007 Mustang GT - Open Headers, Comp Cams Stage 3 XFI Cams, Livernois Stage 3 Heads[/ame]
i was going with BBR stage 2 cams but i talked to comp and fell in love with these.... however i am having comp do a slight modification to the specs and custom grinding them
.560/.560 and 305/320 with a 113LSA
i have two setups at one time....
first setup aka... the "quiet" setup...
bbk longtubes, bbk off road x, magnaflow chambered mufflers exiting out the rear
and the second setup.. the "obnoxious" setup
bbk longtubes, and either borla stingers or pypes m80s side exited
this will be possible without swapping exhausts because i have cutouts welded into the midpipe and then a pipe welded onto the end of the cutout and then either muffler and then side exited... the tips on the side exit will be powdercoated black so it is not noticeable.... it will go from a 2.5" round pipe to a 4" oval pipe and then dumped out the side before it gets to the sideskirt
first setup aka... the "quiet" setup...
bbk longtubes, bbk off road x, magnaflow chambered mufflers exiting out the rear
and the second setup.. the "obnoxious" setup
bbk longtubes, and either borla stingers or pypes m80s side exited
this will be possible without swapping exhausts because i have cutouts welded into the midpipe and then a pipe welded onto the end of the cutout and then either muffler and then side exited... the tips on the side exit will be powdercoated black so it is not noticeable.... it will go from a 2.5" round pipe to a 4" oval pipe and then dumped out the side before it gets to the sideskirt
gotta send BBR one more payment and my order will be shipped!
bbr forged internal kit - includes
Forged Steel Cobra Crankshaft
Manley H Beam Rods
Forged Pistons
.020 Oversize Moly Rings
Federal Mogal Main and Rod Bearings
Also ordered.
BBR stage 3 ported heads - includes
Manley SS Valves
Racemaster intake valves & Extreme Duty Ext Valves
Manley Valve Spring
Manley Ti Retainers
ARP 2000 main and head stud kit
Other orders on their way:
Fore Precision Upgrade fuel system
80lb injectors
Comp cams custom grind XFI SPR stage 3 blower cams
JPC intake manifold stealth edition
Level 10 5r55s with 3200 stall
4.10 gears from FRPP
bbr forged internal kit - includes
Forged Steel Cobra Crankshaft
Manley H Beam Rods
Forged Pistons
.020 Oversize Moly Rings
Federal Mogal Main and Rod Bearings
Also ordered.
BBR stage 3 ported heads - includes
Manley SS Valves
Racemaster intake valves & Extreme Duty Ext Valves
Manley Valve Spring
Manley Ti Retainers
ARP 2000 main and head stud kit
Other orders on their way:
Fore Precision Upgrade fuel system
80lb injectors
Comp cams custom grind XFI SPR stage 3 blower cams
JPC intake manifold stealth edition
Level 10 5r55s with 3200 stall
4.10 gears from FRPP
