its a simple swap we've doen a good half dozen times in the last few years. like terror said, aeromotive makes a regulator, as does mallory, that will limit an efi fuel pump setup down to 5-8 psi. a 650cfm carb with a edelbrock performer intake is a basic bolt on replacement for stock setup, and is relatively cheap. maybe $100 for the intake used, at most? carb around the same. a distributor swap would be a good idea since it uses the computer as well, Ive heard of people using the stock dist. and rewiring it, but im not sure of how that works. a simple mallory/msd/etc dist. will work fine and is also an easy swap. good luck!, but you probably wont need it since its cake to do this swap!