518 Peps - NYM Veterans Cruise - Sat. July 18th!!

Andrew1021

Andrew1021

Member Plus
#363
#363
RustyNutz said:
Andrew, I live up the road from you. I met you at Ruge's when you were getting your lights installed. If you want, you can swing by and we can head over to the T-way together and meet up with Tim and the others...
Click to expand...

ohh!! yea man. thatll be great. i was gonna go get breakfast at DD then wait at the t-way for them. PM me with ur number. i can meet u at ruges at 830 or 9, whatever time is good for you is good for me.
 
1990_LX

1990_LX

Clubhouse Moderator
#364
#364
Jimmerz said:
this is gonna be awesome, do we have enough two way radios or should i pick up a set?
btw anyone in the amsterdam area that wants to cruise out to latham with me is more than welcome to, but im pondering the idea of getting into latham about 7:30am and hit up the little diner on 9 for some coffee and eggs, my cell is 6187086 for anyone that wants to meet up a little early for some breakfast.
Click to expand...
The halfmoon diner?
 
1

1BIGMOFO

Member Plus
#366
#366
I rolled my fenders today and they came out AWESOME... NOT 1 PAINT CHIP!!!! All you have to do is take your time. Please see the attached pictures..

Here is the deal.

For the show tomorrow I will be bringing my truck and a friend let me borrow her enclosed race car trailer (thanks Lindsey).

I will be bringing a jack, jack stands, blocks, a power converter, a heat gun and the Lake wood fender roller for anyone that wants there fenders done.

This can be done 2 different ways:

1. I roll your fenders with my tools and equipment (i take NO responibility for any chips or damage including wheel studs). Mine came out awesome and im sure they all will but i dont want to create false expectations, im not a professional body guy. I am mechanically inclined and like i said mine are sweet!! This will cost $100 for both rear fenders

2. You roll your fenders with all my tools and equipment (you will have 45 min - 1 hour to complete the job and i take no responsibility for anything you do to your car. This will cost $50.00 for both rear fenders.

The Lakewood Fender roller costs around $300 to buy new and if you rent one its $60 plus you have to pay shipping to and from which is at least $20 each way... Spend $100 to rent one and go threw all the bs and hassle??? OR just get yours done at the show :)

If your interested PM me.. :rock::rock::rock::rock:

Thank you,

Rob
 
1

1BIGMOFO

Member Plus
#377
#377
My bad, it was Tim.

07-09-2009, 09:22 PM
timspony

Member Plus / Site Contributor
timspony is doing his best to help out on July 18th Big Event!

Join Date: Dec 2008
Location: Schenectady
Posts: 3,080
My Mood:

Casino Cash: $19543 NYM Trader: (2)



Re: Rolling rear fenders ?????
Rob - bring it on the 18th....you'll make a killing! :)
__________________
2003 SVT Cobra, DSG #7248 ...NYM MOTM Feb.'09...465 rwhp tuned by Mustang Magic! TIMSPONY
2005 Mustang GT, RagTop, SS, 18" Chrome Bullitts, Pypes AB :p KIMSPONY





For some reason i thought it was Mike... Sorry Mike if you would rather i dont bring it please let me know and i will insert my foot in my mouth and shut up :smash:..
 
Jimmerz

Jimmerz

Member Plus
#380
#380
modularmustang said:
what exit is best to get to walmart, exit 6 or 7? not down in that area alot...
Click to expand...


commin from the north either one.. i forget what number is what i think exit 7 puts you on rt7 and then as you get on alt rt7 get off that very first exit at the light go straight and hang a left into the back side of the latham farms plaza, and follow that road to the stop sign and then you can go left to the next stop sign hang a right and your at wally world i think if you take exit 6 you would go to the light hang a left go up i think two lights and then hang a left at the latham farms entrance, follow that road to your first right and your at wallmart.. seeing that your not down here often i would take exit 6
 
You must log in or register to reply here.