i pulled this cam out of the 302 in my coupe not sure of the miles on the engine but all cam lobes look fine with no gouges. i will take 150 bucks for it
will post pics upon request.
here are the specs:
cam Style: Hydraulic roller tappet Basic Operating RPM Range: 2,000-6,000
Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 226
Duration at 050 inch Lift: 218 int./226 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 292
Advertised Duration: 284 int./292 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.500 int./0.510 exh.
Lobe Separation (degrees): 112
Computer-Controlled Compatible: Yes
will post pics upon request.
here are the specs:
cam Style: Hydraulic roller tappet Basic Operating RPM Range: 2,000-6,000
Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 226
Duration at 050 inch Lift: 218 int./226 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 292
Advertised Duration: 284 int./292 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.500 int./0.510 exh.
Lobe Separation (degrees): 112
Computer-Controlled Compatible: Yes