Kb Install
- Thread starter Wicked One
- Start date
Re: Kb Install started
Update!!!!
Finished the Heat exchanger. The new Afco came in yesterday. Took a little creativity to mount the Lightening pump with the afco, but I got it.
Only issues I ran into with having the gt500 front end
Update!!!!
Finished the Heat exchanger. The new Afco came in yesterday. Took a little creativity to mount the Lightening pump with the afco, but I got it.
Only issues I ran into with having the gt500 front end
- the headlight was a bitch to get back in, had to make a new filter mount
- the filter hits the lower fog light making bumper reinstall a little tough.
Re: Kb Install started
I decided to just rip into it and let it sit until the final install on may 2nd or 3rd.
I mounted the s/c reservoir in the factory airbox location. Took some creativity, but I was determined to get it right. I really need to invest in a tig welder, then I can make my own brackets and shit.
I just used a factory battery hold down hasp, along with a nice little bracket that I jb welded to the bottom for extra support.
Enjoy
I decided to just rip into it and let it sit until the final install on may 2nd or 3rd.
I mounted the s/c reservoir in the factory airbox location. Took some creativity, but I was determined to get it right. I really need to invest in a tig welder, then I can make my own brackets and shit.
I just used a factory battery hold down hasp, along with a nice little bracket that I jb welded to the bottom for extra support.
Enjoy
Re: Kb Install started
Not much to update but I did have to get a hardware kit form KB and also had to order 2 pullys that I did not receive.
The wiring is all done, it was easy as pie
Now all that is left is dropping in the intercooler and routing some hoses. I have a temp probe at the inlet to the I/C and the outlet hooked up to a switch so that I can monitor IAT temps.
Here are some pics.
Not much to update but I did have to get a hardware kit form KB and also had to order 2 pullys that I did not receive.
The wiring is all done, it was easy as pie
Now all that is left is dropping in the intercooler and routing some hoses. I have a temp probe at the inlet to the I/C and the outlet hooked up to a switch so that I can monitor IAT temps.
Here are some pics.
Re: Kb Install started
Got a little ambitious today.
Finished all the wiring, hoses and the little crap. Taking my alternator to prodigy for some nice powdercoating, it looks like ass.
I need to get some brackets, they were not included in the kit neither was another idler pulley. That is all in the works to be here by next week.
All that is left to do is drop on the blower and put on the belt. Oh yeah, and get my valve covers and grills back from Prodigy, I will be there tomorrow.
Here are some teaser pics
Got a little ambitious today.
Finished all the wiring, hoses and the little crap. Taking my alternator to prodigy for some nice powdercoating, it looks like ass.
I need to get some brackets, they were not included in the kit neither was another idler pulley. That is all in the works to be here by next week.
All that is left to do is drop on the blower and put on the belt. Oh yeah, and get my valve covers and grills back from Prodigy, I will be there tomorrow.
Here are some teaser pics
