cam recommendation

[Pitbull Performance]

sweet. what else does he have done to the car. do u know?

We have done all the work to this car it has 2.3 whipple, 8 rib belt kit, kooks L/T headers, catted X pipe, Borla axle back, stage 2 meth injection, 3200 stall pro torque converter, 4:10 gears, true track posi unit, steeda LCA's and steeda wats link.

On a stock motor

 

[97modgt]

We have done all the work to this car it has 2.3 whipple, 8 rib belt kit, kooks L/T headers, catted X pipe, Borla axle back, stage 2 meth injection, 3200 stall pro torque converter, 4:10 gears, true track posi unit, steeda LCA's and steeda wats link.

On a stock motor

Are you running 8-10lbs of boost? I would have figured you would shoot a shitload more tq with that setup. Is all that getting sucked up cause of the auto?

 

[Pitbull Performance]

Are you running 8-10lbs of boost? I would have figured you would shoot a shitload more tq with that setup. Is all that getting sucked up cause of the auto?

A lot of the power and TQ are lost with the auto and the stall converter. The power now is being limited by the stock TB. the car with the boost he is running will make well over 500 RWHP with the stalled auto if we installed whipple monoplade TB. We have not in stalled it and will not until he is ready to build a motor. To make any more power on a stock motor wouldn't be smart.

 

[Andrew1021]

where is ur shop? i might bring my car down so u can do ur work on it and dyno it for me. Im gonna get the TB as well as the whipple

before i get anything tho i need to find decent prices because i dont have alot of money on my side. i work when i can cuz im still in school. so its hard to get money from my standpoint

 

[97modgt]

A lot of the power and TQ are lost with the auto and the stall converter. The power now is being limited by the stock TB. the car with the boost he is running will make well over 500 RWHP with the stalled auto if we installed whipple monoplade TB. We have not in stalled it and will not until he is ready to build a motor. To make any more power on a stock motor wouldn't be smart.

I would agree that a bottom end would be smart. I just don't grasp that you are running enough boost even with the water/methonal kit to make 500hp on a stock bottom end. Does this car run 3v heads? I am fairly new to this site and I am looking to find someone to tune my car. I have a tuner in Cali but due that I am going back to New York, time to do some reasearch. It was mentioned that you do tuning, Is this true and where abouts are you located?

 

[Andrew1021]

my father once did some tuning. but due to work he hasnt had much time, pitbul performance is the place to go. i think they do it

 

[97modgt]

my father once did some tuning. but due to work he hasnt had much time, pitbul performance is the place to go. i think they do it

Are there a lot of tuners to choose from there? I need someone that is knows how to map fuel curves and all that good stuff. Not someone that only knows how to throw a bit of timing at it and run. My first tuner I approached was horrible. I had heard good word about him threw kenne bell. The guy told me I needed to put stock cams back in my car cause it would not run right. He said they were to big. I left that place quick. I reasearched a tuners in the area, found someone that knew what they were talking about and imagine that, the car runs like a dream. Do you know a good starting place that I can look around?

 

[Pitbull Performance]

where is ur shop? i might bring my car down so u can do ur work on it and dyno it for me. Im gonna get the TB as well as the whipple

before i get anything tho i need to find decent prices because i dont have alot of money on my side. i work when i can cuz im still in school. so its hard to get money from my standpoint

We are in Deer park @

Pitbull Performance
88 East industry Ct.
Deer park Ny. 11729

Here is a local map of where we are.

http://www.pitbull-performance.com/1440219.html