anyone looking for a Vortech s-trim for fox body?

[cobra20sc]

With the engine half apart, I was contemplating selling my Vortech kit on my 93 Cobra. Its a V1 S-trim 8 Rib setup with the Aftercooler, AFM power pipe, and everything else in the complete kit will be included (down to the BTM, FMU, bypass valve which is new from last year).
Anyone looking for one?

-Chris

 

[dsblk93gt]

Nice setup! How much timing were you running out of curiosity?

 

[cobra20sc]

10 base with the spout out (26 total). i dropped the BTM when the aftercooler went on, its not needed with the cooler charge temps and 93 octane. in any case, with the tweecer, i really use it to add some timing in at the low RPM's.
this kit by the way surprised me when i put it on my original 93 cobra motor and then again when the new combo was put together. i have had zero issues with the kit (sans the bypass valve which i had to replace last year) and the install was a piece of cake with the instructions and packaging . . .i'd recommend a vortech kit to anyone (not that my recommendation is worth anything, LOL)

 

[dsblk93gt]

10 base with the spout out (26 total). i dropped the BTM when the aftercooler went on, its not needed with the cooler charge temps and 93 octane. in any case, with the tweecer, i really use it to add some timing in at the low RPM's.
this kit by the way surprised me when i put it on my original 93 cobra motor and then again when the new combo was put together. i have had zero issues with the kit (sans the bypass valve which i had to replace last year) and the install was a piece of cake with the instructions and packaging . . .i'd recommend a vortech kit to anyone (not that my recommendation is worth anything, LOL)

Oh ok, I figured you were changing the WOT timing with the tweecer as well.

What did you make for power on the stock motor? I am on my 2nd Vortech and have installed them on other cars as well. They work great and are reliable. I have never installed one with the aftercooler though.

 

[cobra20sc]

ok, thinking back on it now, i did have a B303 cam in the motor and a full exhaust. with vortech and aftercooler it made 440RWHP/420ish torque on a dynojet and ran a 12.00@118+mph on street tires at LV.

 

[dsblk93gt]

Thats pretty good!

 

[PrjctLxEnvy]

ok, thinking back on it now, i did have a B303 cam in the motor and a full exhaust. with vortech and aftercooler it made 440RWHP/420ish torque on a dynojet and ran a 12.00@118+mph on street tires at LV.

I'm no Genious but 440 with just a b cam an exhaust n a vortech? ........ thats F'ing insane......... Sign me the F^%@ up! holy shit

 

[dsblk93gt]

I'm no Genious but 440 with just a b cam an exhaust n a vortech? ........ thats F'ing insane......... Sign me the F^%@ up! holy shit

in a 93 Cobra though, so GT40 heads/1.7 rockers/Cobra intake

A guy on SVTP is making 488rwhp with E303 and stock motor 13lbs of boost I think in a 93 Cobra. He ran 10.9@129 I think, slicks/skinnies.

440 is definitely nothing to sneeze at!

 

[cobra20sc]

Yup that's about right. Mine was pullied for only 10psig of boost so the extra 3 would have gotten it there more or less. The gt40 heads and cobra intake was a solid setup that the bcam really woke up and this was back in 2000!

 

[PrjctLxEnvy]

in a 93 Cobra though, so GT40 heads/1.7 rockers/Cobra intake

A guy on SVTP is making 488rwhp with E303 and stock motor 13lbs of boost I think in a 93 Cobra. He ran 10.9@129 I think, slicks/skinnies.

440 is definitely nothing to sneeze at!

306 GT40Xs holley systemax upper n lower e 303 and 1.6 rockers........

so with an S trim i will have all the power i could possibly want in a fox for the street?

 

[1990_LX]

I see a supercharger heading Eric's way in the near future.

 

[dsblk93gt]

306 GT40Xs holley systemax upper n lower e 303 and 1.6 rockers........

so with an S trim i will have all the power i could possibly want in a fox for the street?

Yea, basically. That's why it is almost pointless to do a built bottom end with a stock block if you are sc'ing it. Your going to max the block out way before the stock rods/pistons/crank.

 

[cobra20sc]

306 GT40Xs holley systemax upper n lower e 303 and 1.6 rockers........

so with an S trim i will have all the power i could possibly want in a fox for the street?

Depends if one could ever be content with JUST 440RWHP. In this hobby I think its rare. LOL.

 

[AdirondackFox08]

With "just" 440 rwhp? Lol, might have to be content with that unless you want to shell out some dough for the Boss block or the Dart block.

 

[cobra20sc]

Well you can do a little more. My current combo is 520rwhp on stock block with just a main support going on 6 years

 

[PrjctLxEnvy]

see i wanted to stay N/A till i met people like this........

 

[cobra20sc]

Glad I could contribute to the corruption. Ha!

By the way I know where you can get a complete vortech setup!

 

[1990gtcory]

how much chris call hoolihan let him no

 

[dsblk93gt]

Didn't meant to hijack the thread either btw. How much do you want for this setup?

 

[dmustang]

I could be happy with 440 at the rear! lol

Never mind I am a bad example!