347 +75 shot 30s enough?

[svtnotch]

My 347 made 376 rwhp and has 30lb injectors 255 fp. Anyone know if the 30 s will be enough for a 75 shot or go 42 lb ? How much rwhp will 30 s handle safely? I think i may also get some more drag oriented springs. Anyone recommend any drag springs that wont make it look like a 4x4? Thanks

 

[Jays04mach1]

Avoid the extra cost of injectors and do a wet Nitrous kit. Extra fuel will be added through the Nitrous nozzle and can be adjusted To get the shot of spray your looking for. Be careful if your NA tune is aggressive, you'll want to retune to take some spark advance out.

 

[svtnotch]

I actually dont have a tune. Last time i had nos on my 306 i took timing out manually. It was so many degees for every 50hp i believe. There has to be some point where the 30s arent enough?

 

[EHA Racing]

Avoid the extra cost of injectors and do a wet Nitrous kit. Extra fuel will be added through the Nitrous nozzle and can be adjusted To get the shot of spray your looking for. Be careful if your NA tune is aggressive, you'll want to retune to take some spark advance out.

Agreed. I like to be able to tune the fuel curve of the nitrous, not let the Maf do whatever it wants with a dry kit.

 

[Wicked One]

I would go up to 42's

On the 95' the 24's were maxed out at 360rwhp, and also get a tune.


But that's me
Good luck.

 

[Jays04mach1]

I would go up to 42's

On the 95' the 24's were maxed out at 360rwhp, and also get a tune.


But that's me
Good luck.

If your adding fuel through the Nitrous nozzle, Why put in bigger injectors?:smash: If he starts doing more mods to the engine N/A, then he should conside it, but until then just let the fuel jet in the nozzle take care of it.

 

[Wicked One]

I jumped the gun on my response.:smash:

I know there is no point in upping the injectors when going to a wet system. I am running boost so it is a different story. Even with my 42's and a 255pump, I am still maxing them out.


OOPS, almost threadjacked.


Go with the wet system and have doug (EHA Racing) Take care of it, he is the man!!

 

[PrjctLxEnvy]

Eibach drag springs look at my Stance, looks pretty good to me.

 

[irishpwr46]

do you have the 30s already? if not go with the 42s. you can add the fuel with a wet kit, but you dont want the fuel system to be running balls out all the time.

 

[The Bone]

cheap alternative is a set of terminator 39lb injectors....those guys throw em out

 

[The Bone]

http://www.svtsnake.com/forum/showthread.php?t=51699

 

[svtnotch]

cheap alternative is a set of terminator 39lb injectors....those guys throw em out

I have a set in my garage. Do they make wiring adapters?

 

[92BIGREDBEAST]

Be careful with the spray..... LOL

 

[irishpwr46]

I have a set in my garage. Do they make wiring adapters?

i dont think you need them if theyre coming off a car built before 05 but these are available


Ford Racing EV6-EV1 Fuel Injector Adapter Kits at AmericanMuscle.com - Free Shipping!

http://www.fiveomotorsport.com/electrical-connectors/

 

[svtnotch]

Thanks everyone. Im gonna go with the nitrous works wet tb plate kit. I had luck with that kit on my 306. I made 1 trip to the track with a 125 shot before i went stroker had timing dialed way back safe. I gained .9 and 10 mph in the1/4 mile. I couldve got better with more track time and timing adjustments had only 3 runs. My car on the new 347 N/A ran 11.901@118.94 with crappy 60 ft.
Figured with 75 shot/dragsprings/shocks/ mt et drag radials and more track time i can get into the 10s. Thanks again