sequential tailights

[myslow04gt]

hey guys have any of you guys tried these, i did but it doesnt seem to be sequential seems more like just a pulse... i know they sell the modifier to slow it down is that what i need... or did i possibly do something wrong

 

[Chief Gilly]

I got the Raxiom tail light set, plug & play not splicing one, and they work good without the relay. You don't need to buy the relay, you can modify your existing relay, if you can solder and can buy a resistor at radio-shack.

When you put on the directional there's no sequence? All the bulbs pulsate at the same time? Did you swap any lights to LEDs? If you swapped to LEDs then you installed load resistors on them?

 

[myslow04gt]

they might be... i got the plug and play not the splice one also... im going to have to check if the bulbs were leds it was just a regular bulb it was just white

 

[IrishBullitt7]

I used the plug and play, No problems

 

[myslow04gt]

when you put your turn signals on all 3 bulbs go 1 by 1... all my bulbs are in working condition and only 2 flash when i put on my turn signal the third stays lit

 

[IrishBullitt7]

when you put your turn signals on all 3 bulbs go 1 by 1... all my bulbs are in working condition and only 2 flash when i put on my turn signal the third stays lit

recheck wiring, that should not happen.

 

[myslow04gt]

hmmm ok will do