I will never put in a Taurus fan again. The Contour/Cougar fans literally look stock to the car, and I love that look.
I actually don't have a fan controller currently. I was in a major time crunch and made my own harness to a big relay. Currently I have a temporary switch under my dash I have to turn on/off manually.
I was talking with my tuner and he says there is a PIN on the ECM that will allow me to run a signal wire and trigger the relay on/off at a certain temp. He is going to play with my car some more this spring. If that doesn't work I will use a DCC Fan controller.
I gave my new A9S a test in the car last night. Fired right up. Next I will be purchasing a braided fuel line to move my gauge up to the windshield for temporary. Eventually it will be installed in the cowl. Need to see if I'm loosing pressure at WOT.
Will prolly also purchase some headlight buckets as mine are cracked badly and the lights aim right at the ground.
I just wanted to throw a shout out to coupe1993 on the Corral. He sent me a cluster for my car without accepting any cash in return even for shipping! Truly an honor to talk with a generous guy such as himself. Thank you sir.
Hopefully I get some time to work on the car this weekend and get it installed. Will make sure I upload some pics the beginning of next week!
Got my SS Braided mechanical fuel line yesterday. Will mock up the gauge so it can be seen under the cowl at WOT to determine if pressure is dropping. Also got my Sinister Mustang decals for the 1/4 windows.
This was the raped looking A9P that came out of my car. I went to the MSR website and it looks very outdated. Anyone know about these guys?
Well the weather is just always swinging both ways here. Yesterday we had what I would only call a torrential downpour of rain. Our driveway slopes down off the road right into our drive in basement. Id say the basement floor is a good 1-2 foot below the road elevation. You can guess the rest. I un-buried the drain tile there and drilled 3 holes in it during the last storm where water got into our basement. It works great until the ditch out front fills up (which it was yesterday) then the water has no where to go.
Plan to rip up the driveway some this year and install new crushed stone and dust. This is getting old fast. Its supposed to dump another .5-3'' of rain here today too. Oh and tomorrow night its supposed to snow! With accumulation!
Still haven't been able to touch the car. Last weekend I came down with a stomach bug and that slowed me way down. Hope this weekend I can get the valves re-adjusted. I also ordered a new set of OEM sized pulleys to get rid of the under-drives.
Back at it... Need to remove the GT40 Tube and adjust the drivers side valves since it has some mile son it after the build. I do have a slight tick on that side so one is definitely a little loose. I also talked with several eBay sellers and found the correct set of injector filters with the larger diameter flow openings. I did find out there are also 2.92 mm I.D.'s as well as these 3.08 mm I.D.'s out there.