I need some info on the Anderson power pipe

[BlackVic]

I am building a supercharged 302 and want to see if the power pipe will fit in my car, it's not a Mustang so the instructions for install don't really apply here.
I need some measurements if anyone has a power pipe installed or sitting around.
I need the measurements front to back(between the blue lines) and side to side(between the red lines) to see if I can use this in my build.

 

[Chief Gilly]

Buy the materials and make the same thing for less than 1/4 the money. Is there some magic hp in this "power pipe"? They want $250 for a 90 bend and two couplings? if you can build a supercharged 302 than this intake pipe should be a breeze. Have more faith in your abilities and save some cash for something you can't make yourself. Try Frozenboost.com all those parts are there.

 

[On Edge]

What chief said.
I also built my own. Piping and couplers come in all different sized diameters and bends.
In your pic, that pipe is probably a 4" with a 90* bend ($30), 90* silicone coupler ($25) and a straight coupler ($15) = $70 for the good quality stuff.