Search results

Selling an Autometer Fox dash gauge cluster that includes a Ford Racing 5" monster tach with slim shift light and two Autometer Phantom 2 5/8" electric oil pressure and water temp gauges. The bezels on the Phantom gauges are a little worn. I bought the cluster as is off the Corral a few months...

Looking to sell a set of 94/95 SN95 fuel rails I had on my 347. These offer a bit more fuel flow over the 87-93 Fox fuel rails. They have used 30lb injectors and a used Paxton adjustable fuel pressure regulator. Looking for $150 picked up or shipped. F/S: SBF Parts - 347 Stroker kit...

Hi Everyone, I'm selling a 347 stroker kit that I put together myself. Parts only have 1000 miles on them. Its a short rod 347 kit which includes a 4" Cast crank from CAT P.E.P, Forged 5.315 I-beam rods with ARP bolts and Forged Probe dished pistons. One caveat is with the pistons which are...

I'm looking to trade my TFS TrackHeat intake for an Edelbrock Performer RPM I/II or a Holley Systemax II intake. I'm the original owner of the TrackHeat and I bought it new. It has less than 1K miles on it and has no strip bolt holes. It will come with the hardware, gaskets and TB/EGR studs...

Looking to sell a used, but in great shape, Global West Track Link torque arm setup, part # TFS-93. All hardware and parts are included. The rubber bushings are in great shape still, as are the nuts and bolts. Check Global West's website for all the details...

Looking to sell a Turbo Coupe rear disc setup that includes new Friction Performanc/A1 Cardone OEM replacement calipers, new Bendix ceramic brake pads, used caliper mounting brackets w/anti-rattle clips, new T/C rubber hose and a used set of Cobra brake mounting brackets. Looking to get $150 +...

Selling one NOS new in box Factory Ford Mustang Cobra left hand caliper that is fully loaded. I got it in a purchase that I got and don't need it. This is good for any one doing a cobra clone or resto and wants matching numbers. Not sure how hard it is to get a matching right one. So the price...

Selling my used Bassani 2 1/2" catted X-Pipe for a Fox body Stang. It's in good shape. I bought used off another board from someone local to NY. The hangers were cut off and there's some scratches on the cat heat shields from scrapping the ground. Other than that, it's in good condition. Looking...

Selling a set of Kenny Brown adjustable lower control arms with the spherical rod ends on the axle side and Poly bushing on the body side. They are in great condition. I traded for these with another corral member, but I think I'm going to go with a non adjustable arm. I believe these are for 99...

I have a Pro-Flow (Pro-M) 87mm Chrome MAF meter calibrated for 30lb injectors that fits 96 and up mustangs. I bought this off the corral probably 7 or 8 months ago to use on my stang and didn't see it wasn't for a Fox. So I'm up to sell it or trade it for the same/similar MAF for a Fox. It needs...

I'm selling parts for a rear disc upgrade. All parts are new and never used. Prices do not include shipping and would be willing to do a package deal for all/some of the parts. Pics are below. NorthRace cars Fox brackets for TC/93 Cobra calipers (uses stock length fox axles) - $125 - Sold...

Selling a good set of front and rear bumper covers. Not sure of the year, but they are for an LX. As you can see in the pics they are grey in color with the black trim. Head light panel and head lights, minus one corner marker are included. $125 for the front, $75 for the rear or $150 for both.

Selling two Garret/AirResearch turbos, both need a rebuild and one needs a new compressor wheel. Good turbos to start a DIY twin setup or replacements for a beater. Both were off a 740 series Volvo. One has a .52A/R compressor housing with a .48A/R exhaust housing and the other has a .42A/R...

Selling the items above All parts are best offer and come off my 1993 5.0. Parts are in good condition except for the oilpan. It's a bit rusty, but no holes. It needs a good bead blasting or wire brushing and paint. I had a shop jet wash it to get most of the old paint off, other than that it's...

Used 1989 World Class T-5 (Part#E9ZR-7003-A - 1352-204) w/bellhousing in good physical condition. There are no visable cracks or repairs to the case. Doesn't look like the tail or top cover has ever been off. Unknown milage. I did have the chance to drive the car it was in while it was running...

Hi, I'm looking to see if you have or can get a pricing quote on coating a TFS lower with a heat barrier coating, same thing for the tops of the pistons and chambers, bottom of valves and coating the piston dry skirts with a dry film lubricant. Thanks

Selling a SBF 349 shortblock that's A4 block based with Eagle 4340 3.4" crank, 5.400" H-beam rods and Probe Forged pistons. Everything is fresh from the machine shop, is balanced and just ready to be put back together. Everything comes with it, Canton 7qt oil pan w/Windage Tray and pickup...

Selling a set of Probe forged flat top pistons for a 347. These are part # 10660-030. They have dual valve reliefs, .912" wrist pins, a 1.090 compression height, are .030" over and works with 5.400" rods. You can look up the part number on Probe's site for the full specs on these. I'm...

Posting for a friend. He has an Eagle/Probe forged rotating assembly for a 302. It makes a 349. The pistons are made by Probe, part312354-040, and are .040" over, have a 1.090 Comp height, reverse dome with a 13.8cc dish, .927" wrist pins, for use on 5.4" rods. The rods are made by Eagle and...

Selling a set of Probe Forged SRS flat top pistons for 347. They are part number 10660-030. You can look up the full specs on Probe's site but some of the specs are -4cc flat top pistons, has valve reliefs for inline and twisted wedge heads, .912" wrist pin and 1.090 compression height. These...